- Diameter: 1/2 in
- Drill Size: 1/2 in
- Finish: Zinc
- Fixture Thickness: 5/8 to 11/16 in
- Head Type: Hex
- Model #: THD50600H
- UPC #: 707392702603
- SKU: 7971419
Your shopping list will be used for pickup in-store
The original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titan HD® offers low installation torque and outstanding performance. Designed and tested in dry, interior, non-corrosive environments or temporary outdoor applications, the Titan HD® demonstrates industry leading performance even in seismic conditions. The stainless-steel Titan HD® is the optimal choice for applications in corrosive or extreme environments such as salt water or when chemical or corrosive solutions are present.
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required, designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD® installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer, unless required by code and provides a clean installed appearance
| Diameter | 1/2 in |
|---|
| Drill Size | 1/2 in |
|---|
| Finish | Zinc |
|---|
| Fixture Thickness | 5/8 to 11/16 in |
|---|
| Head Type | Hex |
|---|
| Length | 6 |
|---|
| Material | Carbon Steel |
|---|
| Minimum Clearance | 5/8 in |
|---|
| Minimum Concrete Thickness | 5 to 6-1/4 in |
|---|
| Tensile Strength | 110000 psi |
|---|
MORE DETAILS:
- Application: For bracing and formwork
